Problem printing STL provided with prusa mk3 printer.

Hello i downloaded your files, i tried printing them with bad result.

I'm an expert in 3d printing and checked the gcode.
The problem is that the gcode is not optimized for my printer. Prusa I3mk3.

The issue is overextruding and perimeter layers.
To solve this problem you can download the PRUSA SLICER FOR FREE and slice the hull pieces with the default settings 0.8mm nozzle 0.4mm height.
Can you do that?

My license number is AV3-118-12

If you have any suggestions let me know. Thank you

https://postimg.cc/Lh8XTVvq
https://postimg.cc/0bLy91vm
https://postimg.cc/mPC2DpZn