Notifications
Clear all
Mar 09, 2022 3:47 pm
Hi Juan, have you any figures for mast prebend please. Just ordered fin so aiming to get on the water asap
Warm Regards Paul
4 Replies
Mar 13, 2022 10:36 am
Hi Paul. A friend has a tool to bend the mast tube. I usually use the french mast and they come out with 28mm prebend starting at 1300mm from the top of the mast.
Nov 23, 2023 6:34 am
Nov 24, 2023 8:55 am
@marcus It is designed for keel stepped mast. I have never tried but if you don't open the hole for the mast in the deck recess you could use it as deck stepped, printing and gluing a proper mast base
Nov 24, 2023 9:37 am
@juan-marcos many thanks. I have been using an old mast while waiting to build a new one it was previously a deck mount so I tried it but is was not ideal.