Notifications
Clear all
0
08/05/2024 6:30 am
Topic starter
Hi Team alioth.
It seems there is a failure on part 3 of my file. two shift, one small one higher up the print and the other major shift that causes the part to faile to print. I have printed it twice and it fails at the same spot so i am deducing it could be a gcode problem.
https://photos.app.goo.gl/GwfoMqfmKytnghJ48
https://photos.app.goo.gl/BDaAc4k7vQPCRtYJA
https://photos.app.goo.gl/ByGfCWJqdbdfTTeYA
See images above. thanks!!
