1 x 065-SE Trough deck block
1 x 052-006 Fairlead 6mm dia
1 x 069 Rudder stock & trunking (4mm)
1 x 035-006 eyebolt 6mm
8 x 035-025 eyebolt M3.5 25mm
1 x 086 Tapered bung
1 x 052 Mainsheet post without trunking
1 x 026-WHEEL Lock wheel M4
1 x CH-M4 Countersunk head screws M4 (one unit)
You will also need fiberglass rod 4mm dia., 1.2mm dia. stainless steel rods for the deck loops, and M2.5 6mm screws and nuts.
Thanks to Will N., here are the converted part numbers for Midwest Model Yachting, a US SailsEtc distributor:
As an update, Sailsetc no longer sells Part#35-006 - 6mm eyebolt, so you will need to order an extra of Part#035-025 - 25mm eyebolt and cut it to length.
In addition you need 2 x Part#035-025 - 25mm eyebolts for running the winch line under the deck.
This means you need to order 9 x Part#035-025 - 25mm eyebolts in total.
Also, you can just order a complete mast ram set from Sailsetc. Part#140-110, rather than building one from Parts 026-WHEEL, CH-M4, and printed parts. The premade set is not costly and includes a tension spring and is a snap fit to an 11mm mast.
You’ll need a dozen or so of the stainless M2.5 socket head screws and nuts
I can’t edit my previous post, but you will likely also need Sailsetc Part#068 - Tiller Arm for 4mm rudder shaft.